Sét là một trong những thiên tai gây ảnh hưởng trực tiếp, làm trì trệ các hoạt động kinh tế, xã hội, mang đến hậu quả nghiêm trọng cho người và tài sản. Nguy hiểm hơn, theo số liệu thống kê hằng năm, lượng người chết và bị trọng thương do sét đánh chiếm tỉ lệ khá lớn.
Therefore, to protect people's lives and structures and objects, people often install lightning protection systems. A lightning conductor is a typical device in the lightning protection system that has the effect of draining the lightning current, conducting it from the lightning rod to the grounding system.
Dây thoát sét thường được làm bằng đồng lá hoặc dây kẽm đồng, tiết diện của dây dẫn được quy định theo tiêu chuẩn quốc tế từ 50mm2 đến 70mm2.
Structure diagram of a lightning protection system includes:
– Direct lightning protection system:
— Lightning rod
— Lightning cord
— Lightning counters
— Ground resistance test box
— Grounding system for direct lightning protection
– Lightning protection system:
— Surge protection equipment on the power line includes 1-phase arresters, 3-phase arresters, and a combination of 1-phase arresters and 3-phase arresters.
— Lightning protection devices on signal and telecommunications lines
— Lightning cord
— Lightning counters
— Ground resistance test box
— Grounding system for lightning protection.
A lightning conductor plays an intermediary role, conducting lightning from the receiver to the ground. To enhance the lightning discharge capacity of this line, it is possible to use wires with a larger cross-sectional area or use special types of lightning conductors such as ERICO's multi-layer anti-interference lightning cable. Conduct lightning from the receiver to the ground via an intermediary. To enhance the lightning discharge capacity for this line, it is possible to use wires with a larger cross-section or use special types of lightning conductors such as multi-layer anti-interference lightning cables from ERICO.