Table of Contents
A water leak detector
The water leak detector is designed to detect water leaks in hidden areas of data centers. For example, in the condensate tray of air conditioning units or under raised floors. These are critical areas where water leaks can cause serious damage to electronic or computer equipment, so when a leak occurs, operators must respond immediately.
Products of ELSA are divided into two categories.
1. 3L-DP
They can be connected with sensor cables up to 200 meters in length. This type cannot determine distance but can detect water leaks using a sound signal and an LED light. It is suitable for detection at a close range.
2. 3L- SP / DP
The DP can connect to sensor cables up to 20,000 meters long. It is designed to meet the need to reduce the risk of leaks by placing a sensor cable or a water leak sensor cable over an area with a risk of water leakage, such as the area below the air conditioner, water mains, etc., or surrounding area. When there is a water leak, the cable sends data for processing at the control device. So we will know the location of the water leak. The system will display the length of the sensor cable in meters on the LCD and give an audible message. It can be connected to the EMS system by communicating through the Modbus protocol for easy monitoring of water leakage.
Example of multi-zone water leak detection system connection.
The touch screen can display the results when the water leak is indicated on the map with the water detection system installed. It is suitable for installation throughout the whole building. Each floor of the building is divided into zones and connected to Modbus RS485
